-
SWP165
SWP165 Series
ProductParameters
Materials & Plated:
Needle 1 (Plunger): BeCu, Au on Ni PlatedNeedle Tube (Barrel): Brass, Au on Ni PlatedNeedle 2 (Plunger): BeCu, Au on Ni Plated
Part: PTFE
Spring (Spring): SWP, Au on Ni Plated
Electrical Specifications (Electrical Spec):
Frontal Static Current (Current Rating): 17A (30s)/10A (300s)
Contact Resistance: 160 mil ohms
Technical Specifications:
Full Stroke: 5.0 mm
Rated Stroke: 3.3 mm
Rated Spring Force (Spring Force): 100 gf @ load 3.3 mm
Normality Condition: Pin 1,2 Open
Press Down: Pin Rod 1,2 Conductive (Press Down 1.5mm)
Product
ntroductionequpent automaton fields. er prout standards and regquiremens eced tose ofoter sees test pins.pes of haes pinstreaded nonthreaded harness pins, harness switch pins, harness – high-current pins, etc. -
spring pin and electricity cans
BIP180 Series
ProductParameters
Materials & Plated:Plunger: BeCu, Au Plated Copper and Gold CoatingBarrel: Brass, Au Plated Brass, Gold-platedSpring: SUS, Au Plated Stainless Steel, Gold Plating
Mechanical Specifications (Recommended):Center Distance (Centers):2.50mm (100mil)
Full Stroke: 2.80mmRated Stroke: 1.80mmRated Spring Force: 220gf (7.8oz)
Electrical Parameters (Electrical Spec.):
Frontal Static Current (Current Rating): 1.00A
Contact Resistance: 100mOhm -
-
Bending Single Pogo Pins
1.Good stability and long using life.
2.Structure is simple and compact.
3.Saving space and easy to connect with PCB.
-
Bending Spring Loaded Contact Pogo Pins
1. Good stability and long using life.
2. Structure is simple and compact.
3. Saving space and easy to connect with PCB.
-
Bending Type Spring Pogo Pins
1. Good stability and long using life.
2. Structure is simple and compact.
3. Saving space and easy to connect with PCB.
